CONCRETE FLOORS FINISHING OF CONCRETE FLOORS
After the initial construction phase and the leveling comes the finishing process. Finishing can be started after the concrete floor is dry enough to walk on it without leaving any footprints. The process is conducted with metal trowels or so-called power trowels or "helicopters". The result is an almost perfectly smooth and level surface. Tal-M korund 3 / A mineral dry shake for concrete floor finishing. Properties:Dry shake - mixture of hard minerals for surface finishing of industrial concrete floors and screeds for medium and high loads. The Mineral dry shake improves mechanical properties and wear resistance of industrial floors and screeds. Base: fresh concrete with a minimum strength class C25/30 and the lowest possible W/C ratio. Area of application:For surface finishing of high-strength exterior and interior industrial concrete floors for the traffic of heavy duty tires. Suitable for workshops, production halls, warehouses, parking garages, shopping centers, schools, treatment plants, hangars etc. Quantity needed:Medium loads: 6 kg/m2.
High loads: 7.5 kg/m2.
Extraordinary loads: 10,5 kg/m2. Additional information:http://www.kema.si/si/proizvodi/tal-m-korund-3.htm Tal-M korund 3 / A mineral dry shake for concrete floor finishing. Properties:Dry shake - mixture of hard minerals for surface finishing of industrial concrete floors and screeds for medium and high loads. The Mineral dry shake improves mechanical properties and wear resistance of industrial floors and screeds. Base: fresh concrete with a minimum strength class C25/30 and the lowest possible W/C ratio. Area of application:For surface finishing of high-strength exterior and interior industrial concrete floors for the traffic of heavy duty tires. Suitable for workshops, production halls, warehouses, parking garages, shopping centers, schools, treatment plants, hangars etc. Quantity needed:Medium loads: 6 kg/m2.
High loads: 7.5 kg/m2.
Extraordinary loads: 10,5 kg/m2. Additional information:http://www.kema.si/si/proizvodi/tal-m-korund-3.htm Tal-M korund 10 / A Hard aggregate screed / topping for concrete floor finishing. Properties:Ready-mix cement-based composition of hard quartz and corundum minerals, reinforcement micro fibers and additives. For the preparation of a micro-reinforced cement coating for the surface finishing of industrial concrete floors exposed to very high loads. Base: fresh concrete with a minimum strength class C25/30 and the lowest possible W/C ratio. Area of application:For surface finishing of exterior and interior industrial concrete floors exposed to very high loads. Suitable for ironworks and other metallurgical plants, industrial halls, cold storages, highways, concrete runways, driving and loading ramps etc. Quantity needed:21 kg/m2 for a layer of thickness 10 mm

     T +386 (0)2 61 61 888    M +386 (0)41 65 07 59    E info@sgdstrdin.si

SGD STRDIN